WÜPLAST® pan head screw with hexalobular recess WN 1452, A2 austenitic steel
SCR-RSD-W1452-T7-A2-2,5X8
Art.-no. 423125 8
EAN 4057708210510
Register now and access more than 125,000 products
30° thread angle
- Reduction of radial stresses
No damage to the screw boss
- Greater flank coverage
Greater pull-out forces
Thread pitch
- High degree of self-locking
The connection is less likely to work itself loose
- Material preservation
Greater load-bearing strength of the connection
Recessed core diameter
- No material damage
Improved process reliability
- Low screw-in torques
Secure screw connection
High-quality surfaces
- Chrome (VI)-free surfaces
- High corrosion resistance
Datasheets(X)
 | |
Nominal diameter (d1) | 2.5 mm |
Length (l1) | 8 mm |
Head diameter (dk) | 4.2 mm |
Head height (k1) | 1.72 mm |
Material | Stainless steel A2 |
Surface | Plain |
Internal drive | TX7 |
Other standard | W1452 |
Head type | Pan head |
Thread type | Plastic screw thread |
Shaft length (a) | 1.30 mm |
Max. drive depth (t max) | 0.85 mm |
Last viewed
Cable tie KBL 1 made of polyamide with plastic tongue
Hexagonal bolt with thread up to head ISO 4017, hot-dip galvanised 8.8U steel (TZN)
Hexagon bolt with thread up to the head ISO 4017, A4-70 stainless steel, plain
L-shaped key TX, short version
Rivet nut, truss head
Elbow pipe wrench Swedish S-jaw form
Blind rivet, large flat head
Valve cleaner
Single wire seal (SEAL) For uninsulated cable connector
Hexagon head bolt DIN EN 14399-4, steel 10.9, hot-dip galvanised (hdg), for high-strength structural bolting assembly