Metal surface cleaner
For detailed information, other images and documents, please select individual articles from the following table.
Metal surface cleaner
A mild cleaning agent that quickly penetrates, dissolves and removes oil sludge, gummy deposits and resinified carbon buildup caused by prolonged exposure to high temperatures without damaging metal surfaces
Exclusively for trade customers
Register now and access more than 125,000 products
Variants
Exclusively for trade customers
Register now and access more than 125,000 products
Most metals (incl. aluminium alloys and stainless steel) can be submerged
Does not damage metal surfaces or materials
Does not damage rubber
Quickly removes oil sludge, oil residue and resinified carbon from metal surfaces
pH 9
Does not damage metal surfaces or materials
Does not damage rubber
Quickly removes oil sludge, oil residue and resinified carbon from metal surfaces
pH 9
Instructions1. This product is non-toxic but slightly corrosive; avoid direct contact with the skin. As this product is chemically volatile, it should be stored in a sealed container to prevent prolonged exposure to air.
2. Generally completely dissolves and cleans grease and resinified carbon from parts within approx. 30 minutes. To prevent the darkening of aluminium alloy parts and the formation of rust spots on hot-forged steel parts, it is recommended to soak the parts for no longer than 3 hours.
3. Parts containing iron should be dried thoroughly with an air gun after submerging, as their surfaces will be almost completely free of grease. If the material is prone to rusting when exposed to the air, apply lubricating oil by soaking or brushing to prevent contact with air and moisture.
4. Do not submerge painted parts, as this may cause the paint to swell and peel.
2. Generally completely dissolves and cleans grease and resinified carbon from parts within approx. 30 minutes. To prevent the darkening of aluminium alloy parts and the formation of rust spots on hot-forged steel parts, it is recommended to soak the parts for no longer than 3 hours.
3. Parts containing iron should be dried thoroughly with an air gun after submerging, as their surfaces will be almost completely free of grease. If the material is prone to rusting when exposed to the air, apply lubricating oil by soaking or brushing to prevent contact with air and moisture.
4. Do not submerge painted parts, as this may cause the paint to swell and peel.
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!