Interior trim clip, type 4 Foot split twice, not combined with cap, head round
Interior trim clip, type 4
INTRMCLIP-PSA-POM-(SEALDISC-BLACK)
Register now and access more than 125,000 products
- Pre-mounted on the trim and then inserted into a corresponding hole on the base component.
- Tolerance compensation possible
- Removal of the trim possible
- Also serves as a seal
Datasheets(X)
Fastening of trims to carrier components
Material | Combi-material |
Colour | White |
Min./max. drill hole diameter | 8.2-8.2 mm |
Min./max. attachment thickness | 0.7-2.5 mm |
Head diameter | 12.5 mm |
Core diameter | 6 mm |
Grip range head | 2.2 mm |
Max. width | 18 mm |
Length below head | 14.5 mm |
Type of vehicle | Universal |
Corresponds to original spare part number | 812396 |
Corresponds to original spare part number 2 | 7473FL |
Last viewed
Countersunk screw with hexagon socket head ISO 10642, steel 10.9, plain
Arm guard W-280 Level C
Combination wrench, inch with POWERDRIV®
360° Spray bottle
Elbow pipe wrench Swedish form, angled 90°
Insulated closable corrugated pipe, slit
HSS WN centre drill bit For HW hole saws (flat cut) and MBS HW cylinder saws
Hammer drill bit Plus Duo-S Vario
Metric double-end flare-nut wrench Bi-hex with POWERDRIV®
Circlip pliers set