Welcome to Würth Taiwan For trade customers only

Gloss seal

Gloss seal
GLOSEAL-250ML

Art.-no. 08930126
EAN 4045989851690

Prices for customers after login
Gloss seal

Art.-no. 08930126

Prices for customers after login
Quantity
PU

Exclusively for trade customers

Register now and access more than 125,000 products

Provides lasting, reliable protection with extremely simple application
  • Resistant to weathering, salt, sunlight, cold cleaner and other influences that generally affect paint

  • Is non-aggressive and therefore gentle on paints

  • Achieves an extremely smooth paint surface and protects for up to 18 months

  • Silicone-free

The usage instructions are recommendations based on the tests we have conducted and based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Datasheets(X)

Safety data sheet

Certificates/ Documents

 | 

 | 

Instructions

The vehicle must be thoroughly washed and all traces of wax removed. Shake well before use. Apply the gloss seal with a soft cloth (not too thin in order to achieve optimum protection). Allow to dry. Polish with a cloth. Vehicle can be worked in sections or all at once.

Contents

250 ml

Smell/fragrance

Characteristic

Colour

Beige

Density

0.99 g/cm³

Shelf life from production

36 Month

AOX-free

Yes

Silicone-free

Yes

Suitable glove:
 
Product
Description
Nitrile chemical protective glove With cotton velour finish inside
Nitrile chemical protective glove With cotton velour finish inside
Description:
Permeation level: 5
Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.
Measured breakthrough time
Permeation level
< 10 min
0
≥ 10 min
1
≥ 30 min
2
≥ 60 min
3
≥ 120 min
4
≥ 240 min
5
≥ 480 min
6

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information