Flat gasket For flat-sealing screw joints of heating and drinking water pipes
Flat gasket
FLSEAL-DN12
Register now and access more than 125,000 products
DVGW-certified
Simultaneous straining of the gasket with the maximum values for temperature and operating pressure is not possible. The specifications also depend on the medium, so they are therefore only guidelines.
Datasheets(X)
 | |
Material | Aramid fibre |
Colour | Grey |
DN nominal width | DN 12 |
Internal diameter (d1) | 12 mm |
Outer diameter (d2) | 18.5 mm |
Thickness (h) | 2 mm |
Min. temperature resistance | -50 °C |
Max. temperature resistance | 200 °C |
Max. operating pressure | 40 bar |
Approval mark | DVGW |
Last viewed
Bearing retaining compound high-strength and heat-resistant
Pan head tapping screw with flange
Flat chisel In line with DIN 6453
Wire cable barrel terminal with nut, left-hand thread
Oil filter Oil Filter
Small radiator roller Professional
Hexagon nut, low profile, with clamping piece (non-metal insert) fine thread DIN 985, steel I10I, zinc-plated, yellow chromated (A2C)
Hexagonal nut with clamping piece (all-metal) DIN 980, steel 8, zinc-plated, blue passivated (A2K)
Inch ratchet combination wrench With POWERDRIV® drive
ALG14/3 COMBI CLASSIC 10.8/14.4 CHARGING UNIT