Circlip For shafts, standard design, shape A DIN 471, spring steel, phosphated and oiled
DIN 471 spring steel phosphated standard version
CRCLIP-SHFT-DIN471-A-18X1,2
Register now and access more than 125,000 products
- For safely limiting freedom of movement - even when there are rotary movements of machine parts on shafts and in bore holes to a predefined level
- High pressure, tensile and impact forces are transferred without torsion
- Transfer of high axial forces from the machine part applying pressure to the groove wall
- Shaft rings can also be used at high speeds
- The rings can be removed quickly and easily using the appropriate pliers
Datasheets(X)
CAD data (available after login)
 | |
Suitable for shafts | 18 mm |
Suitable for groove diameter | 17 mm |
Internal diameter (d1) | 16.5 mm |
Eye width (a1) | 3.9 mm |
Width (b1) | 2.4 mm |
Thickness (s1) | 1.2 mm |
Standards | DIN 471 |
Design | Standard design |
Material | Spring steel |
Surface | Phosphated |
RoHS-compliant | Yes |
Last viewed
Hand tap, taper tap HSS DIN 352
Closure For cable tie gun
Hexagon socket set screw with ring cutter ISO 4029, A2 stainless steel, 21H, plain
1/2 inch POWERDRIV® socket wrench insert metric, bi-hex, long
Hexagonal bolt with thread up to the head ISO 4017, A4-70 stainless steel, plain
Spot weld replacement rasp
Metal feed piece For hand-lever grease gun
Thread die HSS DIN EN 22568 for standard metric ISO threads
Brake spring pliers, passenger vehicles
Twist drill bit HSCo DIN 338 Type RN MFD VARIO