Welcome to Würth Taiwan For trade customers only

Adhesive lubricant HHS® 5000

Adhesive lubricant, HHS 5000
ADHLUB-HHS5000-500ML
HHS

Art.-no. 08931063
EAN 4045989908530

Prices for customers after login
Adhesive lubricant HHS® 5000

Art.-no. 08931063

Prices for customers after login
Quantity
PU

Exclusively for trade customers

Register now and access more than 125,000 products

Extremely temperature-resistant, fully synthetic penetrating oil with PTFE

Reliable lubrication


  • Gets into the areas where the lubricating oil needs to work (excellent creeping properties)

  • Ideally suited for concealed lubricating points


Reliable wear protection


  • Contains PTFE solid lubricant

  • Once the grease film has been torn off, the PTFE performs the lubrication (emergency running property)

  • Durable anti-slip protective film for high temperature loads


Long-term effect for reliability


  • Reliable and long-term protection against corrosion

  • Does not oxidise (harden) up to +200°C, briefly up to +250°C

  • No carbonisation residues


Safe application


  • Good compatibility with the majority of plastics, O-rings and X-rings

  • Neutral behaviour with painted surfaces


Resistant to spray water and salt water, weak acids and bases



Free from silicone, resin and acids

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Datasheets(X)

Safety data sheet

Certificates/ Documents

 | 

 | 

Application area

Extremely temperature-resistant, fully synthetic penetrating oil with PTFE. Provides optimum lubrication safety in everyday use.

Instructions

Shake can well before use. Thoroughly pre-clean the points to be lubricated with HHS® Clean, art. no. 0893 106 10. Then spray onto the cleaned surface

Chemical basis

Mineral oil

Oil basis

Synthetic hydrocarbons

Colour

Transparent

Smell/fragrance

Characteristic

Density

0.86 g/cm³

Min. temperature conditions

-20 °C

Max. temperature conditions

200 °C

Min. flashing point

240 °C

Flashing point conditions

in accordance with DIN ISO 3016

Silicone-free

Yes

Acid-free

Yes

Resin-free

Yes

AOX-free

Yes

Resistance against

Water
Salt water
Acid
Lye

Material compatibility

Steel
Non-ferrous heavy metals
Stainless steel
FKM

Contents

500 ml

Container

Aerosol can

Shelf life from production

24 Month

Suitable glove:
 
Product
Description
Nitrile chemical protective glove With cotton velour finish inside
Nitrile chemical protective glove With cotton velour finish inside
Description:
Permeation level: 6
Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.
Measured breakthrough time
Permeation level
< 10 min
0
≥ 10 min
1
≥ 30 min
2
≥ 60 min
3
≥ 120 min
4
≥ 240 min
5
≥ 480 min
6

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information