Welcome to Würth Taiwan For trade customers only

Wire end brush Stainless steel, knotted, with shank

Spindle-mounted wheel brush/wire end brush, sst
CENTFBRSH-PWRDRL-STAINLESS-D20

Art.-no. 0714692119
EAN 4038898398974

Prices for customers after login
Wire end brush Stainless steel, knotted, with shank

Art.-no. 0714692119

Prices for customers after login
Quantity
PU
x 1 pcs

Exclusively for trade customers

Register now and access more than 125,000 products

Ideal for machining hard-to-reach areas on stainless steel and aluminium.
  • Aggressive effect thanks to knotted wire

  • The knots open more or less depending on the speed, and high speeds improve the brushing performance and service life

  • PE coating to prevent damage to the workpiece

  • For use on die grinders and drills
Notice
  • The plastic-coated design prevents damage to the component being machined.

  • Only the bristle tips act on the workpiece. Excessive contact pressure does not improve the result, but increases the required drive power and reduces the service life of the brush.

  • Always wear safety goggles and protective gloves when working with machine brushes!
Application area
Instructions for use (optimising brushing results)
MeasurementPeripheral speedBrush diameterWire thicknessBristle length
Increase brushing effect
Reduce brushing effect
Brush creates ridge
ApplicationsPeripheral speed [in m/s]
Recommended peripheral speeds for brushing
1520253035404550
Deburring 25 - 35
Cleaning welding seams 35 - 45
Removing scale 35 - 45
Polishing 30 - 40
Plastic machining15 - 25
Product information

Datasheets(X)

Certificates/ Documents

 | 

 | 

Application area
  • Cleaning corners, recesses, holes

  • For cleaning moulds/cast parts

  • For removing paint and rubber residues

Diameter (D1)

20 mm

Sleeve diameter (D2)

19 mm

Usable length of wire (H)

28 mm

Wire diameter

0.25 mm

Length (L)

72 mm

Number of braids

6 PCS

Shank diameter (S)

6 mm

Material of wire

Stainless steel

Design

Braided
Plastic covered

Aggressiveness

Middle

Suitable for cordless drills (points system)

2 of 4 points

Suitable for drill (points system)

2 of 4 points

Suitable for straight grinder (point system)

4 of 4 points

Max. rotation speed

20000 1/min

EN standard

1083-2

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information