Wire cup brush Crimped steel with M14 connecting thread
Cup brush, corrugated steel wire
CPBRSH-AG-WAVED-LONGLIFE-ST-D60XM14
Register now and access more than 125,000 products
- Efficient machining of large surfaces thanks to wire cup brush with crimped wire
- Crimped wire bristles support each other and thus increase stability during brushing
- For direct use on angle grinders
- Only the bristle tips act on the workpiece. Excessive contact pressure does not improve the result, but increases the required drive power and reduces the service life of the brush.
- For optimal results, use on angle grinders with adjustable speed. For the best performance, use a tool drive with at least 300 W.
- Always wear safety goggles and protective gloves when working with machine brushes!
Datasheets(X)
- Removing paint, dirt and rust
- Derusting and polishing
- Light deburring work
 | |
Diameter (D) | 65 mm |
Usable length of wire (H) | 20 mm |
Tool holding device (d) | M14 |
Wire diameter | 0.35 mm |
Material of wire | Steel |
Design | Corrugated, Single row |
Aggressiveness | Middle |
Suitable for angle grinder (point system) | 4 of 4 points |
Max. rotation speed | 12000 rpm |
EN standard | 1083-2 |
Last viewed
3/8 inch socket wrenches Assortment of 16 pieces
Cylinder saw, HSS bimetal Longlife & Speed HSCo8
Pin contact Solid Uninsulated
Film dispenser For simple handling of masking film
1/4 inch fully manual ratchet With freewheel function
System insert, plastic, 4.4.2
Leather belt
Spray head VARIOCAP For Refillomat
Carbide milling bit assortment, toothing MX 10 pieces
Guide drill bit A014C For adapter A2