Wire cup brush Braided steel with M14 connecting thread
Braided wire cup brush steel
CUPBRSH-AG-KNOTTED-ST-D65XM14MM
Register now and access more than 125,000 products
- Efficient machining of large surfaces with high wear resistance thanks to clockwise braiding on the wire cup brush
- For direct use on angle grinders
- Only the bristle tips act on the workpiece. Excessive contact pressure does not improve the result, but it does increase the required drive power and reduces the service life of the brush.
- For optimal results, use on powerful angle grinders.
- Always wear safety goggles and protective gloves when working with machine brushes!
Datasheets(X)
- Removing slag, rust, scale, concrete residue
- Cleaning welding seams
- Removing varnish and paint
- Preparing metal surfaces before painting
- Metalworking workshops, welding companies, the automotive industry, shipbuilding/shipyards
 | |
Diameter (D) | 65 mm |
Usable length of wire (H) | 20 mm |
Tool holding device (d) | M14 |
Wire diameter | 0.50 mm |
Number of braids | 18 PCS |
Material of wire | Steel |
Design | Hardened, braided clockwise, Single row |
Suitable for angle grinder (point system) | 4 of 4 points |
Max. rotation speed | 12500 rpm |
EN standard | 1083-2 |
Last viewed
ASSY® 3.0 A2 Particle board screw
Circlip For shafts, standard design, shape A DIN 471, spring steel, phosphated and oiled
Circlip for bore hole, standard version, shape J DIN 472 for bore holes, spring steel, phosphated and oiled
Tool case with transport rollers
Scraper blade
Hex head screw with thread up to head ISO 4017, A2-70 stainless steel, plain
Tool holder with ratchet Short design
Hexagon nut, low profile, with clamping piece (non-metal insert) inch Similar to DIN 985, steel GR5, zinc-plated, blue passivated (A2K)
TIPP® silicone pipe clamp
Rough grinding disc for stainless steel