Wheel brush Crimped steel, with shank
Wheel brush with shank
WHLBRSH-SHNK-STEEL-D60X13X6MM
Register now and access more than 125,000 products
- Increased stability during brushing
- Crimped wire bristles support each other
- For use on die grinders and drills
- High speeds improve brush performance and service life
- Only the bristle tips act on the workpiece. Excessive contact pressure does not improve the result, but increases power consumption and reduces the service life of the brush
- Always wear safety goggles and protective gloves when working with machine brushes!
Datasheets(X)
- For removing rust, paint, contamination etc.
- Cleaning welded seams
- Light deburring work
 | |
Diameter x usable width x shaft diameter (DxAxS) | 60 x 13 x 6 mm |
Usable length of wire (H) | 14 mm |
Wire diameter | 0.30 mm |
Material of wire | Steel |
Design | Corrugated |
Suitable for cordless drills (points system) | 2 of 4 points |
Suitable for drill (points system) | 2 of 4 points |
Suitable for straight grinder (point system) | 4 of 4 points |
Max. rotation speed | 15000 rpm |
EN standard | 1083-2 |
Last viewed
Folding knife BLACK ROCK special edition
Knurled thumb screw, high profile DIN 464, A1 stainless steel, plain
Drawer part, 4 compartments ORSY® 1 shelving system
Allen key hexagon socket
1/4" socket wrench insert metric, long
Hexagonal bolt with thread up to the head ISO 4017, steel 10.9, zinc-plated, blue passivated (A2K)
Combination wrench assortment, offset 9 pieces
Hexagonal bolt with thread up to the head DIN 558, steel 4.6, zinc-plated, blue passivated (A2K).
Slotted raised countersunk head screw ISO 2010, A2 stainless steel, plain
plastic sealing ring Natural, similar to DIN 7603