Wheel brush Crimped steel, with shank
Wheel brush with shank
WHLBRSH-SHNK-STEEL-D40X9X6MM
Register now and access more than 125,000 products
- Increased stability during brushing
- Crimped wire bristles support each other
- For use on die grinders and drills
- High speeds improve brush performance and service life
- Only the bristle tips act on the workpiece. Excessive contact pressure does not improve the result, but increases power consumption and reduces the service life of the brush
- Always wear safety goggles and protective gloves when working with machine brushes!
Datasheets(X)
- For removing rust, paint, contamination etc.
- Cleaning welded seams
- Light deburring work
 | |
Diameter x usable width x shaft diameter (DxAxS) | 40 x 9 x 6 mm |
Usable length of wire (H) | 9 mm |
Wire diameter | 0.20 mm |
Material of wire | Steel |
Design | Corrugated |
Suitable for cordless drills (points system) | 2 of 4 points |
Suitable for drill (points system) | 2 of 4 points |
Suitable for straight grinder (point system) | 4 of 4 points |
EN standard | 1083-2 |
Max. rotation speed | 18000 rpm |
Last viewed
6-hole sandpaper with hook-and-loop backing AM LINE (6 inches)
Diesel injection cleaner
Hose clamp with clamping jaw
Pole terminal puller, twin leg, 65 mm span
Cordless LED hand-held lamp WLH 1.5
O-ring, metric
Synthetic corundum flap wheels
1/4 inch socket wrench insert, metric short
1/4" socket wrench insert For hexagon socket, metric
Circlip For shafts, standard design, shape A DIN 471, spring steel, phosphated and oiled