Wheel brush Braided steel with hole
Round brush steel
RDBRSH-AG-KNOTTED-ST-D150X14X22,23MM
Register now and access more than 125,000 products
- No premature opening of the bundles when the brush is positioned at an angle
- Aggressive brushing effect with high wear resistance thanks to anti-clockwise braiding on the wheel brush
- For use on angle grinders
- Only the edge tips act on the workpiece. While excessive contact pressure does not improve the result, it does increase the required drive power and reduces the service life of the brush.
- Always wear safety goggles and safety gloves when working with machine brushes!
Datasheets(X)
- Removes scale, rust, varnish, slag and rubber residues
- Cleans concrete residue from formwork
 | |
Diameter (D) | 150 mm |
Effective width (A) | 14 mm |
Usable length of wire (H) | 30 mm |
Drill hole (d) | 22.23 mm |
Wire diameter | 0.50 mm |
Material of wire | Steel |
Design | Hardened, braided anti-clockwise |
Max. rotation speed | 12500 rpm |
Aggressiveness | Middle |
Suitable for angle grinder (point system) | 4 of 4 points |
EN standard | 1083-2 |
Last viewed
No-hole sandpaper with hook-and-loop backing AM LINE (for steel materials)
Waterproof pin housing TE Superseal 1.5 series
Flat blade fuse MAXI Silver
Needle scaler attachment For pneumatic chipping hammers
ATF performance improver
Circlip For shafts, standard design, shape A DIN 471, spring steel, phosphated and oiled
Hook-&-Loop Backing Plate Flexible Rotary Polisher
Hexagonal bolt with thread up to the head DIN 933, A4 stainless steel, plain
Brake cleaner Plus
Asmt./set mixed tech. chemicals