WÜPLAST® pan head screw with hexalobular drive WN 1452, A2 austenitic steel
WÜPLAST W1452 stainless steel A2 pan head TX
SCR-RSD-W1452-T10-A2-3X10
WUEPLAST
Register now and access more than 125,000 products
30° angle
- Reduction of radial stresses
No damage to the screw boss
- Greater flank coverage
Greater pull-out forces
Thread pitch
- High degree of self-locking
The connection is less likely to work itself loose
- Material preservation
Greater load-bearing strength of the connection
Reset core diameter
- No material damage
Improved process reliability
- Low screw-in torques
Secure screw connection
High-quality surfaces
- Chrome (VI)-free surfaces
- High resistance to corrosion
Datasheets(X)
CAD data (available after login)
 | |
Nominal diameter (d1) | 3 mm |
Length (l1) | 10 mm |
Head diameter (dk) | 5.6 mm |
Head height (k1) | 2.22 mm |
Material | Stainless steel A2 |
Surface | Plain |
Internal drive | TX10 |
Other standard | W1452 |
Head type | Pan head |
Thread type | Plastic screw thread |
Shaft length (a) | 1.5 mm |
Max. drive depth (t max) | 1.3 mm |
Last viewed
End brush Steel, knotted, with shank
Solder cable lug DIN 46211
Release tool For connectors with two symmetrically arranged locking lugs
Half-shell hexagon crimping insert
Silicone spray
1/2" socket wrench insert metric, bi-hex, short
Terminal block without wire guard
Cylindrical pin, unhardened ISO 2338 M6 A4 stainless steel plain
Twist drill bit HSCo DIN 338 Type RN MFD VARIO
Stud with small head DIN 1434, steel, zinc-plated, blue passivated (A2K)