Universal holder E 6.3 (1/4") With quick-change chuck
Univ. holder E 6.3 (1/4) quick-change chuck
HOLD-BIT-QCCHUK-1/4INX1/4IN-L51MM
Register now and access more than 125,000 products
- Non-magnetic holder for screws in metallic environment. Magnets would attract swarf.
- Quick-change chuck forms a strong connection between holder and bit Pushing the clamping bush forward slightly releases the latch mechanism and facilitates extremely rapid tool replacement.
Datasheets(X)
Drive | E 6.3 (1/4 inch) |
Drive type | Outer hexagon |
Tip size | 1/4 inch |
Tip type | Hexagon socket |
Length (L) | 51 mm |
Last viewed
Underfloor guide partial extension Dynamic NT soft-close
Head assembly for brake fluid replacement tool BIKE
1/2" socket wrench insert metric, bi-hex, short
Hexagon socket set screw with truncated cone ISO 4026 A2 stainless steel 21H, plain
Hexagonal bolt with thread up to head
Ratchet lashing belt, one-part
Hexagonal bolt with thread up to the head ISO 4017, A4-70 stainless steel, plain
Hexagon nut, low profile, with clamping piece (non-metal insert) DIN 985, A4 stainless steel, plain
Manual mounting pliers
Ratchet combination wrench Multi-profile for five screw head drives