Universal adapter For cooling system tester
Univ. adap., cool. sy. test. 19.5-38 mm
UNIADAPT-F.CLSYSTEST-085350-SML
Register now and access more than 125,000 products
Datasheets(X)
Particularly for Japanese vehicles
1. Adapter rubber and opening to be sealed must be free of oil, grease and glycol residues
2. Press the adapter into the radiator opening or expansion tank and seal by rotating the two adjustment wheels against one another
3. Connect radiator tester
4. Pump approx. 1.3 bar into the cooling system using the hand pump
5. The pressure in the cooling circuit must not drop by more than 0.2 bar within 10 minutes.
6. In the event of a drop in pressure, localise and eliminate potential points of leakage (e.g. water pump, hoses, cylinder head seal)
Caution: The universal adapter should never be immersed in cooling fluid as this causes fluid leakage at the valve when the pressure is released.
null | null |
Last viewed
ORSY® 10 dispenser system For thin-walled heat shrink hoses
Hexagon nut ISO 4032 steel 8, hot-dip galvanised (HDG)
Sealing ring
Cut protection glove W-500 Level F
ASSY® 4 COMBI T transportation anchor screw Steel zinc plated partial thread hexagon head
Halogen bulb
Bonded seal
Perfect zinc spray
Thin-walled heat-shrink hose Shrink rate 2:1 without internal adhesive
Hexagon nut DIN 934, steel I6I/I8I, zinc-plated yellow (A2C/A3C)