Union nipple
Socket union brass
SKTUN-BRS-DN12-AG-G1/2IN
Register now and access more than 125,000 products
- Direct connection to a female thread, eliminating double nipples
- Only one screw connection per joint, resulting in greater safety and saving of a union nut and a seal
Datasheets(X)
For the connection of two stainless steel corrugated pipes
For connection to a female thread
Mounting is the same as for a union nut, i.e. slide a union nipple over the pipe, compress the pipe, place a gasket in-between and screw in.
 | |
Material | Brass |
Connection thread | ET G 1/2 inch |
DN nominal width | DN 12 |
Internal diameter | 16.0 mm |
Width across flats (SW) | 24 mm |
Length | 19 mm |
Last viewed
Flat washer For hexagon head bolts and nuts DIN 125, A2 stainless steel
3/8 inch socket wrench insert metric, hexagon, short
Asmt./set mixed tech. chemicals
Twist drill bit HSCo DIN 338 type RN MAGMA
Winter glove, Comfort
Pan head screw with H cross recess DIN 7985, A2 stainless steel, plain
System stacking cabinet For ORSY® system case 8.4.2
Fuse holder For flat blade fuses with covers
Metric combination wrench with POWERDRIV®
Flat washer For hexagon head bolts and nuts, DIN 125, plain brass