Prices for customers after login
Register now and access more than 125,000 products
Do not spray on joints, engines, gears and brake systems. After use, turn the can upside down and spray until the valve is empty.
The usage instructions are recommendations based on the tests we have conducted and are based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.
For repairing and protecting concealed areas that do not need to be painted. Ideally suited for use as anti-humming compound in external applications involving e.g. wheel wells, underbody seals, etc.
Shake can well before use. The surface must be dry and free from rust, dirt or grease. Optimum spraying distance is 30 cm. Allow the product to dry between coatings in case of thicker coatings. Working pressure: 3–6 bar.
Surface pre-treatment required
Dry, dust and grease-free
Weight of content
Min. proportion of solids
Conditions for through drying
At 20°C, 400 μ wet
Min. spraying distance
Conditions for skin-formation time
Min. skin-formation time
Conditions for drying time
Shelf life from production
Max. temperature resistance
Min. temperature conditions
Min. temperature resistance
Max. spraying distance
Recoatable/Can be painted over
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!