Underfloor guide partial extension Dynamic NT soft-close
Underfloor guide, Dynamic NT part. ext. Soft-close
UFLRGUID-DYNAMIC-30KG-SP-SOFTCLOSE-300MM
GRASS
DYNAMIC
Register now and access more than 125,000 products
Fabrication tolerances of +1/–2 mm are automatically counterbalanced
Combination of steel balls and roller bearing
The appropriate lock coupling enables tool-free height adjustment of +2.5 mm.
Specified dimensions not binding. Subject to technical changes!
Datasheets(X)
- Mounting of cabinet profile with Euro screw. Drawer assembly with lock coupling.
- Assembly: The connection between the drawer and guide is established by means of clipping on when sliding on.
- Disassembly: Unlock lock coupling at right and left. Pull out drawer to the front.
 | |
Nominal length | 300 mm |
Suitable for drawer depth | 290 mm |
Load capacity | 30 kg |
Type description | Underfloor partial extension Dynamic NT TA |
Minimum installation depth | 300 mm |
Opening/closing system | Soft-close |
Extension loss | 67 mm |
Last viewed
Hexagonal bolt with thread up to head
Natural hand cleaner, plastic-free
HSCo Multi Longlife machine tap for blind holes DIN 371/376
Hexagon nut, low profile DIN 985, steel I6I/I8I, zinc-plated, blue passivated (A2K)
Metric double box-end wrench with POWERDRIV®
Metric double box-end wrench with POWERDRIV®
Silicone fluid silicone spray
Hexagonal bolt with thread up to the head DIN 558, steel 4.6, zinc-plated, blue passivated (A2K).
C 6.3 TX bit (1/4 inch)
Heat-resistant crepe masking tape +120 °C