Two-ply lifting strap
Lifting strap two-ply
LFTSTRP-(EN1492-1)-3000KG-L4000-W90MM
Register now and access more than 125,000 products
The load pressure is distributed over a large area thanks to the wide contact surface. Sensitive loads and surfaces can be lifted more gently than with a narrow sling.
- Flat woven fabric, with crane loops at both ends
- Reinforced crane loops
- Various sling configurations are possible
- Protects surfaces
- Considerably lower risk of injury compared with conventional slings
- High load-bearing capacity despite own low dead load
- Load capacity can be determined quickly thanks to colour coding
- High abrasion resistance
In accordance with DIN-EN 1492-1
GS-approved
Datasheets(X)
- Extremely rugged and durable sling for all types of loads
- Thanks to their low dead load and high flexibility, the lifting straps have excellent handling properties, which is why they are used both in factories and on construction sites
 | |
Width of band | 90 mm |
Effective length | 4 m |
Colour | Yellow |
Load-bearing capacity (single direct) | 3000 kg |
Load-bearing capacity (single u-shape) | 6000 kg |
Load-bearing capacity (single noosed) | 2400 kg |
Material | PES - Polyester |
Min./max. temperature conditions | -40 to 100 °C |
Standards | EN 1492-1 |
Last viewed
Hexagonal bolt with thread up to the head DIN 558, steel 4.6, zinc-plated, blue passivated (A2K).
Metric combination wrench with POWERDRIV®
Hexagon socket set screw with truncated cone ISO 4026 steel 45H, zinc-plated blue passivated (A2K)
Metric double box-end wrench with POWERDRIV®
Flat washer For hexagon head bolts and nuts DIN 125, A2 stainless steel
Tapered pin with female thread, unhardened DIN 7978, plain steel, unhardened
TX bit
Silicone fluid silicone spray
1/4 inch cardan joint
Hexagonal bolt with thread up to head for pressure container construction DIN EN ISO 4017, A4 stainless steel