Thread die HSS DIN EN 22568 for standard metric ISO threads
Threaded die HSS DIN 13-1
THRDIE-HSS-DIN223-M5
Register now and access more than 125,000 products
Two-sided cut
- Can be used on both sides
- Threads can be cut in one process
- Easy cutting and excellent chip removal in cutting direction
High edge retention
Datasheets(X)
The die is placed in the die holder at the height of the middle screw. The screws are tightened with a screwdriver. The die is placed vertically on the workpiece. Can be used on both sides. When cutting, sufficient cutting oil must be added. After two revolutions, the cut can be broken by briefly turning back.
Type description | For metric ISO thread DIN 13 |
Cutting material | HSS |
Surface | Plain |
Thread type | Metric thread |
Form | B |
Tolerance class | 6g |
Thread type x nominal diameter | M5 |
Pitch | 0.8 mm |
Outer diameter | 20 mm |
Height | 7 mm |
Material to be processed | Steel |
Last viewed
Hard foam insert for 1/4 inch socket wrench assortment
O-ring cutting jig The o-ring jig can be used to manufacture inch or metric rings in any size
Machine screw tap HSCo green ring through hole DIN 371/376
Special pliers For cable ties, stainless steel AISI 304 with ball lock
Multi-purpose drill bit Multipack MFD-S 1/4 inch hex shank, 6 pieces
Cylindrical pin, unhardened ISO 2338 A1 stainless steel (m6)
Hexagon nut, low profile DIN 985, steel I6I/I8I, zinc-plated, blue passivated (A2K)
Static mixing tube
Twist drill bit HSCo DIN 338 type RN MAGMA
Hexagon Socket Head Cap Screw with centre, with low head DIN 6912, steel 10.9, plain