Tap wrench
Tap wrench, adjustable
TAPWRNCH-SZ4-(M9-M27)
Register now and access more than 125,000 products
- Can be driven by a tool with a DIN 10 square or an ISO/R 237 square
From size 4 upwards, features a two-part safety mechanism to prevent the tap wrench opening unintentionally
Datasheets(X)
Size | 4 |
Length | 500 mm |
Suitable for | Screw tap M9 - M27, square 5.5 - 16 mm |
Material | Malleable cast iron |
DIN | 1814 |
Last viewed
Lock washer with right-angle cross-section, shape B DIN 127, A2 stainless steel, plain
Twist Drill bit HSCO DIN 338 TYPE RN
1/2 inch socket wrench insert metric, hexagon, short
Plug-in nipple Series 2000
Pin punch In accordance with DIN 6450 form C with hardened impact head
Cutting discs, WÜRTH, for stainless steel
Countersunk screw with hexagon socket head ISO 10642, steel 10.9, plain
Hexagon Socket Head Cap Screw with low Head DIN 7984, steel 8.8, plain
Sealing ring, aluminium, shape A
4-CUTTER PLUS HAMMER DRILL BITS