TIME-SERT® UNC threaded bushing
Insert nut UNC Time-Sert
NUT-INRT-UNC-(1/4-20)XL0,38IN
TIME-SERT
Register now and access more than 125,000 products
Tear-out strength
The tear-out strength may vary subject to application (edge areas etc.) and material. As a result, no general information can be provided on this topic. Tests in the Würth laboratory have shown that the Time-Sert thread repairs are equivalent to the original threads in most cases.
Datasheets(X)
Surface | Zinc phosphated |
Material | Steel |
Nominal diameter x number of thread starts per inch (My) | 1/4 x 20 |
Length in inches (L) | 0.38 in |
Last viewed
Pneumatic blow-off pen With suspension clip
Segmented Grinding Disc for Steel Synthetic corundum
Stepped tommy bar
Hexagonal bolt with shank ISO 4014, steel 10.9, zinc-plated, blue passivated (A2K)
Single wire seal (SEAL) For uninsulated cable connector
Wood clamp
Spring band clamp pliers, spare part, internal cable
Metric ratcheting box-end wrench With POWERDRIV® drive
Repair hose line, NBR/CR With medium permeation for non-fuel-carrying applications
T-handle, TX with side tip