Single-cut tap for W.TEC® INSERT COIL helical inserts - shape D, made of HSS
Screw tap, HSS, shape D
TAP-HELCINRT-GRND/THRGHO-HSSG-M10X1,5
Register now and access more than 125,000 products
Single-cut tap for creating receiving threads for W.Tec® Insert Coil helical inserts.
Datasheets(X)
- Suitable for blind holes and through holes
- For machine processing and manual processing
Material | HSS-G |
Form | D |
Tolerance class | 6H modified |
Suitable for thread insert | M10 |
Thread diameter | 11.95 mm |
Thread length | 42 mm |
Core hole diameter | 10.4 mm |
Lead angle length | 4.5 mm |
Length | 85 mm |
Adapter type | Square-cut |
Square width | 7 mm |
Shank diameter | 9.2 mm |
Last viewed
Twist drill bit assortment HSCo DIN 338 Type RN MFD VARIO 25 pieces
Scraper and blade set 27 pieces
Sealing ring, aluminium, shape A
AW® C 6.3 bit (1/4 inch) with patented AW tip and colour coding
Hand tap, taper tap HSS DIN 2181
Starline Plus work dungarees
Wire end ferrule with plastic sleeve
3/8-inch socket wrench For TX screws, short
Dispenser system
Silicone fluid silicone spray