Silicone-free mould release agent
KONTEQ SIBASE RELEASE AGENT OIL
Register now and access more than 125,000 products
- For effortless demoulding
- Suitable for any coating process involving oil-based paint, screen printing or any other form of decoration
- Components do not need to be degreased after moulding
- No unpleasant odour for comfortable working
- Suitable for use on materials such as steel, plastic and elastomers
- Washable
Hazard warning: Follow the safety precautions during use.
Datasheets(X)
A versatile product that can be used as an alternative to silicone products in challenging demoulding applications. For use in plastic injection moulding.
Also suitable for preventing adhesion to moulds, lubricating conveyor belts and treating guide rails and vacuum sealers in the agrifood industry. For treating press boards in the paper industry. For paper trimmers in the printing industry. For treating conveyor belts, guide rails and blister packing machines in the packaging industry.
For best results, make sure that the surface is clean, dry and free from oil and grease. Shake the can before use. Spray a thin layer over the surface from a distance of 20 to 30 cm.
Contents | 500 ml |
Chemical basis | Silicone oil |
Shelf life from production | 24 Month |
Conditions to maintain shelf life from production | at 23°C and 50% relative humidity |
Max. temperature conditions | 35 °C |
Density | 0.84 g/cm³ |
Density conditions | at 15°C |
| Technical specifications | Standard | Value |
| Elastomeric expansion, 168 h at +70°C | FTM 791 | 0.5% |
| Copper strip corrosion, 24 h at +100°C | ASTM D 4048 | 1 a |
| Base oil freezing point | - | -50°C |
Last viewed
SW contact spray
Halogen bulb
1/4-inch socket wrench insert, TX head for external TX screws
HHS 100 adhesive lubricant
Compressed air drum pump
1/2 inch impact socket wrench insert hexagon, metric, short
Blind bucket rivet, flat head
Visual tester for anti-freeze, battery and urea solution
C 6.3 slotted bit (1/4 inch)
Other calendars