Shrink, planishing and finishing hammer
Planishing/bumping/finishing hammer, large faces
PANBETHAM-BDYWRK-SPN
Register now and access more than 125,000 products
Datasheets(X)
Length of head | 115 mm |
Face diameter (hammer) (Ø) | 46 mm |
Peen length x peen width | 40 x 40 mm |
Hammer weight | 500 g |
Material | Hardened steel |
Material of handle | Hickory |
Length of handle | 320 mm |
Last viewed
Circlip for bore hole, standard version, shape J DIN 472 for bore holes, spring steel, phosphated and oiled
Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
Twist drill bit HSCo DIN 338 type RN oxide
Circlip For shafts, standard design, shape A DIN 471, spring steel, phosphated and oiled
Hexagonal bolt with shank DIN 601, steel 4.6, zinc-plated, blue passivated (A2K), with nut
Countersunk screw with hexalobular head ISO 14581, A2-070 stainless steel, plain
Electrical insulating tape
Circlip for bore hole, standard version, shape J DIN 472 for bore holes, spring steel, phosphated and oiled
Multiple plug housing for blade connectors 2.8 x 0.5 mm
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, A2-70 stainless steel