Separator
Separator tool
SEPRTL-SPNW75MM
Register now and access more than 125,000 products
- This separator is used if puller hooks cannot reliably grip the part being extracted as it is seated too closely. The separating blades are mounted between the parts and pressed against each other. The wedge shape of the separating blade separates the assembly.
- The separator can also be used to remove thin parts, as the pull-off force acts on a large area. Prevents undesirable deformations and damage. The separating blades are mounted with the flat surface under the part to be removed.
- Drop-forged and hardened separating blades
- High-strength clamping screws
Datasheets(X)
 | |
Min./max. internal clamping width (A) | 14-75 mm |
Width of clamping jaw (B) | 115 mm |
Spindle length (C) | 170 mm |
Min./max. hole distance (E) | 76-139 mm |
Material of separating blade | Vanadium steel |
Surface of the separating blade | Zinc plated |
Thread dimension | M10 |
Last viewed
Anti-freeze tester For coolant
Ceramic engine protector
Reflector nozzle
Segmented Grinding Disc for Steel Synthetic corundum
Blade receptacle Uninsulated
Hex head screw with thread up to head ISO 4017, A2-70 stainless steel, plain
Thin-walled heat-shrink hose assortment 130 pieces in system case 4.4.1.
Multi-point housing For flat plug-in sleeve 6.3 x 0.8 mm
Metric ratcheting box-end wrench With POWERDRIV® drive
Twist drill bit HSS DIN 338 type RN 130°