Separator
Separator tool
SEPRTL-SPNW155MM
Register now and access more than 125,000 products
- This separator is used if puller hooks cannot reliably grip the part being extracted as it is seated too closely. The separating blades are mounted between the parts and pressed against each other. The wedge shape of the separating blade separates the assembly.
- The separator can also be used to remove thin parts, as the pull-off force acts on a large area. Prevents undesirable deformations and damage. The separating blades are mounted with the flat surface under the part to be removed.
- Drop-forged and hardened separating blades
- High-strength clamping screws
Datasheets(X)
 | |
Min./max. internal clamping width (A) | 30-155 mm |
Width of clamping jaw (B) | 215 mm |
Spindle length (C) | 310 mm |
Min./max. hole distance (E) | 137-262 mm |
Material of separating blade | Vanadium steel |
Surface of the separating blade | Zinc plated |
Thread dimension | M18 x 1.5 |
Last viewed
Countersunk head screw with recessed head, H DIN 965, A2 stainless steel, plain
Vehicle cable round cable (hose line) FLRYY
Pulling adapter
Hexagonal bolt with thread up to the head ISO 4017, steel 12.9, plain
ASSY® 4 CSMP universal screw Steel zinc plated partial thread countersunk milling pocket head
Countersunk screw with hexagon socket head ISO 10642, steel 10.9, plain
Cabin air filter QUICK FILTER PM 2.5
Sheet metal nut, type 1
Flat washer without chamfer ISO 7089 steel 300 HV, zinc-plated, blue passivated (A2K)
HSCo green-ring machine tap for blind holes DIN 371/376