Separator
Separator tool
SEPRTL-SPNW115MM
Register now and access more than 125,000 products
- This separator is used if puller hooks cannot reliably grip the part being extracted as it is seated too closely. The separating blades are mounted between the parts and pressed against each other. The wedge shape of the separating blade separates the assembly.
- The separator can also be used to remove thin parts, as the pull-off force acts on a large area. Prevents undesirable deformations and damage. The separating blades are mounted with the flat surface under the part to be removed.
- Drop-forged and hardened separating blades
- High-strength clamping screws
Datasheets(X)
 | |
Min./max. internal clamping width (A) | 22-115 mm |
Width of clamping jaw (B) | 170 mm |
Spindle length (C) | 250 mm |
Min./max. hole distance (E) | 115-208 mm |
Material of separating blade | Vanadium steel |
Surface of the separating blade | Zinc plated |
Thread dimension | M14 x 1.5 |
Last viewed
Hexagonal bolt with thread up to the head DIN 933, A2 stainless steel, plain
Countersunk head screw with hexagon socket ISO 10642, A2-070 stainless steel, plain
Circlip For shafts, standard design, shape A DIN 471, spring steel, phosphated and oiled
Multi-purpose grease III
Hexagon nut, low profile, with clamping piece (non-metal insert) DIN 985, steel I10I, zinc-plated, yellow chromated (A2C/A3C)
Multi-socket wrench 3/8 inch Assortment of 22 pieces
FPM/ECO/AR/ECO petrol hose with low permeation for fuel-carrying applications
Cleaning/care aid assortment/set
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, A2-70 stainless steel
Hexalobular-socket cylinder head screw, low head