Segmented Grinding Disc For Stainless Steel
Lamella flap disc for stainless steel
4 INCH DISPOSABLE DISC EMERY GRINDING WH
Register now and access more than 125,000 products
For freehand grinding with electric or pneumatic angle grinders
Circumferential speed max. 80 m/s
Free of iron, chlorine and sulphur (≤ 0.1%)
Robust polyester-cotton mixed fabric
Glass fabric backing disc
Abrasive cloth (zirconia alumina)
- Long service life
- High rate of material removal
- Self-sharpening
Use appropriate protective clothing, e.g. safety glasses, gloves, work shoes and dust mask when working. Always use an appropriate protective hood when performing grinding work. Using damaged discs increases the risk of accidents. Work only with undamaged discs. The permissible circumferential speed may not be exceeded.
Clear and correct disc storage
Dry, at +20°C room temperature
Complies with the most demanding safety requirements of European Standard EN 13743 and the OSA (Organization for Safety of Grinding Tools )
Datasheets(X)
- Used to grind edges and surfaces, dressing and smoothing, deburring and for weld seam processing.
- Stainless steel sheets, non-alloyed special steels, alloyed and high-alloy steels, rust- and acid-proof steels, chrome-nickel steels
Diameter (Ø) | 100 mm |
Drill hole | 16 mm |
Grid size | 80 |
Design | 0 - not applicable |
Material of carrier disc | Fibre glass |
Max. rotation speed | 13300 rpm |
Material of abrasive medium | Aluminum Zirconium |
Last viewed
Countersunk head screw with hexagon socket ISO 10642, steel 12.9, plain
Circlip For shafts, standard design, shape A DIN 471, spring steel, phosphated and oiled
Solder cable lug DIN 46211
Single wire seal (SEAL) For uninsulated cable connector
Hook-&-Loop Foam Pad Flexible Rotary Polisher
Countersunk head screw with recessed head, H DIN 965, A2 stainless steel, plain
High-gloss polish P20 Plus
1-inch impact socket wrench insert hexagon, metric, short
Wing nut, edged wing shape (American type) A2 stainless steel, plain
Lance