Satin-finish wheel brush Crimped stainless steel with hole
Stainless steel brush
BRSH-SST-SATNFINR-100X12X19MM
Register now and access more than 125,000 products
- Increased stability during brushing
- Crimped wire bristles support each other
- Uniform and consistent machining results due to uniform bristle arrangement
- For use on angle grinders
- Only the edge tips act on the workpiece. While excessive contact pressure does not improve the result, it does increase the required drive power and reduces the service life of the brush.
- Can be used on all standard stationary drive machines and bench grinders thanks to variable bore diameters.
- Always wear safety goggles and safety gloves when working with machine brushes!
Datasheets(X)
Deburring, cleaning and removal of oxide layers and paints
Diameter x width x drill hole | 100 x 12 x 19 mm |
Max. rotation speed | 8000 rpm |
Material of wire | Stainless steel |
Design | Corrugated |
Wire diameter | 0.2 mm |
Suitable for satin finisher (point system) | 4 of 4 points |
Aggressiveness | Middle |
EN standard | 1083-2 |
Last viewed
Release tool
Product-specific pressure sprayer, unfilled
1/2 inch lever reversible ratchet, dust-protected
Cavity wax
Medium-strength flange sealant
Hexagon nut, low profile, with clamping piece (non-metal insert) inch Similar to DIN 985, steel GR5, zinc-plated, blue passivated (A2K)
Hexagonal cap nut, high profile DIN 1587, steel, strength class 6, zinc-plated, blue passivated (A2K)
Flat chisel For pneumatic chipping hammers
1/2 inch POWERDRIV® socket wrench insert metric, bi-hex, long
1/2 inch POWERDRIV® socket wrench insert metric, bi-hex, long