Rubber Eraser
Sheet eraser
SHTERSR-2PCS
Register now and access more than 125,000 products
- Operate only with slow-running machines (max. 2000 rpm).
- Do not use the film rubber on plastic parts and painted plastics (e. g. bumpers, motorcycle trim etc.)!
- Note direction of rotation (opposite of working direction): Do not work too long in one place because excessive heat generation can harm sheet metal and paint. Always use safety goggles, hearing protection and gloves when working.
- In some cases, may lead to discolouration when used on water-based paint. In this case we recommend preliminary tests in non-visible places.
Datasheets(X)
Suitable for all commercially available drills, cordless screwdrivers and straight grinders.
Roughen the edges of the film rubber (e.g. on the clean edge of a workbench) before the first work process.
Outer diameter | 90 mm |
Last viewed
Countersunk head screw with hexagon socket ISO 10642, A2-070 stainless steel, plain
wSafe® 2000 pneumatic safety coupling With hose connection
Dispenser system
Release tool For connectors with two symmetrically arranged locking lugs
6-hole sandpaper with hook-and-loop backing AM LINE (6 inches)
Electrical insulating tape set
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, A4-80 stainless steel, plain
Hexagon nut, low profile, with clamping piece (non-metal insert) DIN 985, A4 stainless steel, plain
HSCo green-ring machine tap for blind holes DIN 371/376
1/4 inch sockets Assortment of 42 pieces