Rivet nut with flat head and knurled shank
Dome head steel zinc plated knurled shank open
NUT-RIV-MHD-(A2K)-(0,5-3)-8,9X16-M6
Register now and access more than 125,000 products
Chrome (VI)-free: complies with the EU End of Life Vehicles Directive
- Rivet nuts combine two types of fastening: A blind rivet connection and an additional screw connection.
- This primarily enables screw connections to be used in relatively thin-walled structural elements.
Advantages of knurled shaft:
- Increased tightening torques and resistance to turning
- Suitable for fastening all materials, especially aluminium, plastic and fibreglass
The specified extraction values are guideline values, and the information may vary for this reason, depending on the workpiece, drilled hole tolerance and roughness of the surface.
Datasheets(X)
CAD data (available after login)
 | |
Material | Steel |
Surface | Zinc plated |
RoHS-compliant | Yes |
Thread type x nominal diameter (D) | M6 |
Length (l1) | 16 mm |
Head diameter (d1) | 12.0 mm |
Outer diameter (d2) | 8.9 mm |
Head height (k1) | 1.6 mm |
Min./max. grip range (s1) | 0.5-3.0 mm |
Tensile fracture load | 17640 N |
Shear-fracture load | 3430 N |
Max. tightening torque | 20 Nm |
Shank detail | With knurled shank |
Head type | Dome head |
Last viewed
Plastic expanding rivet without cap, with multiple slits
Hammer drill bit cassette with SDS and Duo-S Vario drive arbor Seven pieces
Polishing Paste AP10
wSafe® 2000 pneumatic safety coupling With male thread
Foam Gun SP1
Screwdriver slotted striking cap with hexagon shank
Silicone spray
Crimp cable lug, blade connector PVC-insulated
Tool case
Hose clamp with asymmetrical lock