Repair hose line, NBR/CR With medium permeation for non-fuel-carrying applications
Repair hose line with medium permeation
REPHOSELNE-2A-UPPERRUBBER-BLCK-D4,0X10,0
Register now and access more than 125,000 products
- Material: NBR/CR
- Medium permeation of fuel vapours
- Oil and acid-resistant outer elastomer layer for protection against abrasion, ozone and weathering
- Medium heat resistance
- Complies with EU End-of-life Vehicles Directive
- Flexible
Due to the addition of renewable raw materials in commercially available petrol and diesel fuels and increasingly high operating temperature ranges, Type 2A hoses are not recommended for use in fuel-carrying applications in motor vehicles. Observe the manufacturer's specifications.
Please note that the manufacturer's specifications must be complied with with regard to the operating temperature for high-performance engines subject to high temperatures.
For production-related reasons, the hoses are not always delivered in one piece. For 15 m max. 3 pieces, for 10 m max. 2 pieces.
Not suitable:
- For use in fuel-carrying applications
- For use in fuel tanks
- For gear and engine oils
Datasheets(X)
Suitable for use in motor vehicles as a fuel-tank overflow line/engine vent line or vacuum hose.
Internal diameter (ID) | 4 mm |
Outer diameter (AD) | 10 mm |
Colour | Black |
Min. temperature conditions | -35 °C |
Max. temperature conditions | 90 °C |
Length | 15 m |
Max. operating pressure | 10 bar |
Testing pressure | 20 bar |
Last viewed
C 6.3 TX bit (1/4 inch)
Slotted impact bit 5/16 inch
Countersunk head screw with hexagon socket ISO 10642, A2-070 stainless steel, plain
Paint protection film
Lubricating grease WGF 130
Hexagonal nut with reduced width across flats DIN 934, steel I8I, zinc-plated, yellow chromated (A2C)
4-CUTTER PLUS HAMMER DRILL BITS
pias® drilling screw with hexagon head and drill tip Case-hardened steel, zinc-plated, blue passivated
Adhesive weight remover
Hexagonal bolt with thread up to the head ISO 4017, A4-70 stainless steel, plain