Ratchet combination wrench
Ratchet combination wrench, metric, retaining ring
RTCHCOMBIWRNCH-SWITCHABLE-SNAPRG-WS18MM
ZEBRA
Register now and access more than 125,000 products
Design: metric, straight
Drive: POWERDRIV bi-hexagon ring end with retaining ring, finely toothed, 72 teeth with reversing lever for clockwise and anti-clockwise rotation and 5° angle of rotation
Very rugged, strong ratchet tool for high tightening torques
Standard: max. torque according to DIN 899
Material: Chromium-vanadium steel
Surface: Basic body chrome-plated, matt satin finish, ring yellow-nickel-plated
Geometry: Jaw angle 15°, angled 15°, ring matt nickel-plated
Please note: This is a specialist tool, therefore the ring side is only suitable for loosening bolts to a limited extent.
Datasheets(X)
Loosen bolts using the open end and tighten using the ratchet mechanism on the ring end
 | |
Width across flats (SW) | 18 mm |
Length (L) | 237 mm |
Possible uses, 6-sided/12-sided metric | 18 mm |
Thickness of jaw (a1) | 8.2 mm |
Ring thickness (a2) | 10.7 mm |
Width of jaws (outside) (b1) | 37.2 mm |
External diameter of ring (d) | 32.3 mm |
Max. torque (F max.) | 235 Nm |
Material | Chrome-vanadium steel |
Surface | Chrome plated |
Last viewed
Locking disc spring washer, shape M A4 stainless steel, plain
Lock washer, inch DIN 127, spring steel, mechanically applied zinc coating
Pan head screw with H cross recess DIN 7985, A2 stainless steel, plain
Hammer drill bit Plus Duo-S Vario
Hexagon nut DIN 934, steel I8I, hot-dip galvanised (hdg)
Air tool fittings 1500 Series
HSCo Longlife TiAlN+ red-ring machine tap for blind holes DIN 371/376
Aluminium paste AL 1100
Hydraulic crimping tool, WHK 60/22 For half-shell crimping inserts, width 22 mm
4-CUTTER PLUS HAMMER DRILL BITS