Ratchet combination wrench
Ratchet combination wrench, metric, retaining ring
RTCHCOMBIWRNCH-SWITCHABLE-SNAPRG-WS16MM
ZEBRA
Register now and access more than 125,000 products
Design: metric, straight
Drive: POWERDRIV bi-hexagon ring end with retaining ring, finely toothed, 72 teeth with reversing lever for clockwise and anti-clockwise rotation and 5° angle of rotation
Very rugged, strong ratchet tool for high tightening torques
Standard: max. torque according to DIN 899
Material: Chromium-vanadium steel
Surface: Basic body chrome-plated, matt satin finish, ring yellow-nickel-plated
Geometry: Jaw angle 15°, angled 15°, ring matt nickel-plated
Please note: This is a specialist tool, therefore the ring side is only suitable for loosening bolts to a limited extent.
Datasheets(X)
Loosen bolts using the open end and tighten using the ratchet mechanism on the ring end
 | |
Width across flats (SW) | 16 mm |
Length (L) | 208 mm |
Possible uses, 6-sided/12-sided metric | 16 mm |
Thickness of jaw (a1) | 7.2 mm |
Ring thickness (a2) | 9.9 mm |
Width of jaws (outside) (b1) | 33.2 mm |
External diameter of ring (d) | 30.3 mm |
Max. torque (F max.) | 179 Nm |
Material | Chrome-vanadium steel |
Surface | Chrome plated |
Last viewed
Hexagonal bolt with thread up to the head DIN 933, A2 stainless steel, plain
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 12.9, plain
Hexagonal bolt with thread up to the head DIN 933, A2 stainless steel, plain
Bevelled-edge chisel In accordance with DIN 5139
Product-specific pressure sprayer, unfilled
Cylindrical pin, hardened ISO 8734 steel plain, type A hardened, tolerance class m6
3/8" socket wrench insert Inch, hexagon, short
1/4 inch socket wrench insert, metric short
3/4-inch impact socket wrench insert hexagon, metric, short
Lock washer, inch DIN 127, spring steel, mechanically applied zinc coating