Ratchet combination wrench
Ratchet combination wrench, metric, retaining ring
RTCHCOMBIWRNCH-SWITCHABLE-SNAPRG-WS16MM
ZEBRA
Register now and access more than 125,000 products
Design: metric, straight
Drive: POWERDRIV bi-hexagon ring end with retaining ring, finely toothed, 72 teeth with reversing lever for clockwise and anti-clockwise rotation and 5° angle of rotation
Very rugged, strong ratchet tool for high tightening torques
Standard: max. torque according to DIN 899
Material: Chromium-vanadium steel
Surface: Basic body chrome-plated, matt satin finish, ring yellow-nickel-plated
Geometry: Jaw angle 15°, angled 15°, ring matt nickel-plated
Please note: This is a specialist tool, therefore the ring side is only suitable for loosening bolts to a limited extent.
Datasheets(X)
Loosen bolts using the open end and tighten using the ratchet mechanism on the ring end
 | |
Width across flats (SW) | 16 mm |
Length (L) | 208 mm |
Possible uses, 6-sided/12-sided metric | 16 mm |
Thickness of jaw (a1) | 7.2 mm |
Ring thickness (a2) | 9.9 mm |
Width of jaws (outside) (b1) | 33.2 mm |
External diameter of ring (d) | 30.3 mm |
Max. torque (F max.) | 179 Nm |
Material | Chrome-vanadium steel |
Surface | Chrome plated |
Last viewed
Twist drill bit HSCo DIN 338 type RN oxide
Female thread plug-in nipple
Flat washer with chamfer DIN EN ISO 7090, steel, hot-dip galvanised (hdg), hardness class 200 HV
Head assembly for brake fluid replacement tool BIKE
1/4-inch socket wrench insert, TX head For external TX screws
1/2-inch impact socket wrench insert hexagon, metric, short
Circlip For bore hole shape J DIN 472 plain stainless steel
Hexagon socket set screw with truncated cone ISO 4026 steel 45H, zinc-plated blue passivated (A2K)
Hexagon socket bit assortment, hole, 7 pcs.
DP 300 engine and housing sealing compound