Rapid SML connector
SML connector, Rapid
CON-SML-RAPID-DN100
Register now and access more than 125,000 products
Fast, safe connection with only one screw-in nut
Simple mounting of the connector thanks to pre-mounted, slip-proof EPDM sealing insert
Closing of connector with simple Allen screw size 6 / size 8
No torque wrench or special tools required
Pre-assembly of pipes and moulded parts requires no effort due to powerful clamping effect
No tightening torque required, as block tightening is used (both clamping jaws must strike each other)
Datasheets(X)
CAD data (available after login)
For building drainage
 | |
DN nominal width (∅D) | DN 100 |
Width across flats | 6 mm |
Material of sealing ring | Ethylene propylene diene terpolymer rubber EPDM |
Material of sheet-metal ring covering | Chrome steel |
Material of fastener | Steel |
Operating pressure | 0.5 bar |
Internal drive | HS6 |
Min. temperature resistance | -10 °C |
Max. temperature resistance | 95 °C |
Height (H) | 135 mm |
Width (BM) | 40 mm |
Thread type | Metric thread |
Resistance against | Aging |
Outer diameter | 125 mm |
Nominal diameter | 8 mm |
Last viewed
No-hole sand paper with hook-and-loop backing AM LINE (green)
1/2" Pneumatic impact wrench DSS-1054Nm
Solder cable lug DIN 46211
Hole saw HW
Static mixing tube
Countersunk head screw with hexagon socket ISO 10642, A2-070 stainless steel, plain
Medium-strength screw retainer
Hexagonal bolt with threading up to head
Multi-Tester Pro II LCD two-pin voltage tester
Hexagon nut, low profile DIN 985, steel I6I/I8I, zinc-plated, blue passivated (A2K)