Radiator Cleaner
Radiator cleaner
RADCLNR-250ML
Register now and access more than 125,000 products
Removes corrosion and sludge deposits in the cooling circuit.
Increased operational reliability due to clean cooling system.
Neutralises lime residues
New coolant is protected from contamination by old dirt residues.
Compatible with anti-freeze
Alkaline in pH range of 9-11
Compatible with all materials used to build the radiator.
Removes deposits in the cooling circuit and cleans out contamination in the cooling system. For instance, oil residues caused by damage to the cylinder heads can be removed. The radiator cleaner can also be used as a preventative measure every time the coolant is changed.
250 ml is sufficient for 10 litres of cooling water. 1000 ml is sufficient for 40 litres of cooling water.
The cleaner is not suitable for vehicle operation.
The usage instructions are recommendations based on the tests we have conducted and our experience. Carry out your own tests before each application. Due to the large number of applications as well as storage and usage conditions, we do not assume any liability for a specific application result. Any technical information or advice provided by our free customer service shall be provided to the exclusion of any liability, unless the advice or information is part of our contractually agreed scope of services or the advisor was acting wilfully. We ensure the consistent quality of our products. We reserve the right to make technical changes and further developments to our products.
Datasheets(X)
Contamination in the cooling system after engine repairs, e.g. oil residues in the cooling system due to cylinder head damage
- In the event of deposits forming in the cooling circuit
- Can be used preventively whenever coolant is changed
Add the contents of the can to the cooling water. Open the heater valves. Run the engine at operating temperature for approx. 30 minutes. Deposits that have been dislodged by the radiator cleaner must be flushed away with water. The flushing process can be carried out without removing the thermostat. It is recommended that parts that have been affected by oil ingress, such as the expansion tank and water hoses, be replaced. Refill the cooling system after cleaning, bleed and check for leaks.
Contents | 250 ml |
Colour | Yellow |
Smell/fragrance | Mild |
Chemical basis | Water |
Density | 1.023 g/cm³ |
Density conditions | at 20°C |
Shelf life from production | 24 Month |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
Last viewed
Allen key set, TX 8 pieces
Cabin air filter QUICK FILTER PM 2.5
1/2 inch socket wrench hexagon socket long
Pneumatic blind rivet gun PNG 122
Rust Stop primer
Aluminium lashing plate
3/8 inch socket wrenches Assortment of 16 pieces
Screw with flattened half round head and hexagon socket ISO 7380-1 A2-070 stainless steel, plain
Hexagonal bolt with thread up to head ISO 4017, hot-dip galvanised 8.8U steel (TZN)
TX double box-end wrench