Portable welding protection wall
Portable protective welding screen
PROTWELDSCRN-MOB-EN1598
Register now and access more than 125,000 products
Translucent orange welding protection curtain
Risk factor < 1
Degree of reflection: 230 to 400 nm < 10%
Dimensions:
- Wall: W x H: 200 x 190 cm
- Curtain: W x H: 205 x 180 cm
According to Article 5 of VBG (Institution for Statutory Accident Insurance and Prevention in the Administrative Sector) Accident Prevention Regulation 15, work stations for arc welding must be set up in such a way that non-participants are protected against harmful effects of optical radiation to the skin and eyes.
In accordance with EN 1598
Datasheets(X)
Welding:
- Protects non-participants from harmful effects of optical radiation to the skin and eyes.
- Mechanical protection against weld spatter and slag that is to be removed.
- "Translucent" in accordance with DIN 32504, Part 1
Grinding:
- Hot grinding sparks and particles are deflected thanks to the flame-retardant, spark-resistant curtain.
- Employees, vehicles, painted surfaces, glass etc. are effectively protected.
- Flame-retardant and spark-resistant in accordance with DIN 53438, Part 2
Painting:
- The protection wall can also be used for painting and undercoat work thanks to its chemical resistance.
- Chemical resistance in accordance with DIN 4646, Part 5
Wet conditions:
Also protects against water or spray
Sun:
- Protects against glare and unwanted heat radiation
- Film is resistant to UV radiation.
- UV-resistant in line with DIN 4646, Part 5
ISO | EN ISO 25980 |
Width x height | 200 x 190 cm |
Last viewed
1/4" socket wrench insert For hexagon socket, metric
Countersunk head screw with hexagon socket ISO 10642, A2-070 stainless steel, plain
WGLG 100 self-igniting gas soldering device
Hexalobular screw with flattened half round head
Hexagonal bolt with thread up to the head ISO 4017, A4-70 stainless steel, plain
Hexagon socket set screw with truncated cone ISO 4026 steel 45H, zinc-plated blue passivated (A2K)
Wing repair washer According to DIN 522, zinc-plated steel, blue passivated (A2K)
Threaded fuse MIDI
Split pin ISO/WN 1234 steel zinc-plated
Simplex soft face hammer With steel housing