Welcome to Würth Taiwan For trade customers only

Polishing Paste AP30+

Polish and sealant Low Cut AP30+
POL-(ANTIHOLOGRAM)-AP30PLUS-500ML

Art.-no. 0893468
EAN 4065746503129

Prices for customers after login
Polishing Paste AP30+

Art.-no. 0893468

Prices for customers after login
Quantity
PU

Exclusively for trade customers

Register now and access more than 125,000 products

One step polish & seal, low cut
  • Perfect one step polishing and sealing

  • Smooth the fine texturing in the paint

  • Bring deep shine and high gloss to surface

  • Wax particles inside (Filler effect)

  • Water based formulation with emulsified gasoline fractions (oil in water emulsion)
Notice

This information is only a recommendation based on our experience. Preliminary testing required!

Product information

Datasheets(X)

Safety data sheet

Certificates/ Documents

 | 

 | 

Application area
  • For slight weathered and old lacquer
Instructions
  • Wash the car before use

  • Shake the bottle well


Manually:


  • Apply evenly to the paint surface with a soft pad.

  • Working in a circular motion.

  • Let it work and dry for a short time.

  • Remove residual polish with a microfiber cloth.


By machine:


  • Apply a small amount of product on a cleaning pad by spreading it over the surface

  • Position the polishing pad flat on the area and start the machine

  • Apply a certain pressure at 1500–2000 rpm, process the surface until grinding traces or paint imperfections have been removed

  • Work in sections!

  • Remove residual polish with a microfiber cloth

Chemical basis

Water and wax

Smell/fragrance

Sweet

Colour

Green

pH value

7.5

Density

0.96 g/cm³

Shelf life from production

24 Month

AOX-free

Yes

Silicone-free

No

Suitable glove:
 
Product
Description
Nitrile chemical protective glove With cotton velour finish inside
Nitrile chemical protective glove With cotton velour finish inside
Description:
Permeation level: 4
Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.
Measured breakthrough time
Permeation level
< 10 min
0
≥ 10 min
1
≥ 30 min
2
≥ 60 min
3
≥ 120 min
4
≥ 240 min
5
≥ 480 min
6

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information