Plastic plug-in connectors
Straight passage connector, plastic
QCKPLGCON-CHANNEL-STRAIGHT-PLA-D8MM
Register now and access more than 125,000 products
- Operating temperature: -20°C to +80°C
- Permissible operating pressure max. 20 bar
Above a certain length, pipes "vibrate", irrespective of whether they are made of steel, copper or plastic. Therefore, all pipes should be secured on the body or on the frame using pipe clamps, rubberised if possible, wherein the distance should be 1 m and must not exceed 1.20 m.
Datasheets(X)
Suitable for plastic hoses of different material qualities. Not for brake systems, only for secondary consumers.
Installation:
Insert polyamide pipe into the quick-action connector while overcoming slight resistance of the O-ring and pressing in pipe as far as it will go
Removal:
Press clamping ring against connection and pull out pipe
 | |
Outer diameter of pipe (D1) | 8 mm |
Outer diameter (G) | 13.5 mm |
Length (L) | 38 mm |
Max. operating pressure | 20 bar |
Material of gasket | Nitrile |
Material | Plastic |
Material of serrated washer | Stainless steel |
Min./max. temperature conditions | -20 to 80 °C |
Last viewed
Hexagonal bolt with thread up to the head DIN 933, steel 10.9, zinc-plated, blue passivated (A2K)
Personal protective equipment set
VKP® PLUS sealing tape
Manometer
ASSY® 4 CS fittings screw zinc-plated steel, assortment 2100 pieces
Wing repair washer According to DIN 522, zinc-plated steel, blue passivated (A2K)
Flat washers with large external diameter
Knife blade Martor trapezoidal blade no. 60099
Vehicle cable round cable (hose line) FLRYY
Double-jointed socket wrench