Plastic T-connector
Plastic T-plug-in connectors
QCKPLGCON-(T-CON)-PLA-D4MM
Register now and access more than 125,000 products
- Operating temperature: -20°C to +80°C
- Permissible operating pressure max. 20 bar
Above a certain length, pipes "vibrate", irrespective of whether they are made of steel, copper or plastic. Therefore, all pipes should be secured on the body or on the frame using pipe clamps, rubberised if possible, wherein the distance should be 1 m and must not exceed 1.20 m.
Datasheets(X)
Suitable for plastic hoses of different material qualities. Not for brake systems, only for secondary consumers.
Installation:
Insert polyamide pipe into the quick-fit plug while overcoming slight resistance of the O-ring and pressing in pipe as far as it will go
Dismantling:
Press clamping ring against connection and pull out pipe
 | |
Outer diameter of pipe (D1) | 4 mm |
Outer diameter (G) | 8.5 mm |
Distance from centre of pipe to end of T-piece (L/2) | 14.5 mm |
Length (L) | 29 mm |
Height (H) | 19 mm |
Max. operating pressure | 20 bar |
Material of gasket | Nitrile |
Material | Plastic |
Material of serrated washer | Stainless steel |
Min./max. temperature conditions | -20 to 80 °C |
Last viewed
Multi-purpose drill bit Multipack MFD-S 1/4 inch hex shank, 6 pieces
Hexagonal bolt with shank
3/8" socket wrench bi-hex, multi profile
Diesel combustion chamber cleaner
TIPP® silicone pipe clamp
Air conditioning evaporator detergent Step 1_Degrease
Nylon brush
Tungsten carbide bur with MX teeth
1/4 inch socket wrench insert, metric short
HSCo Multi Longlife machine tap for through holes DIN 371/376