Paintwork finishing hammer
Body smoothing hammer
PANBETHAM-BDYWRK-D12MM-HANDLE200MM
Register now and access more than 125,000 products
With its specially shaped and polished striking surface, the hammer can be used to carefully straighten bulges or over-pulled dents
The striking surface is not chrome-plated to prevent chipping. Therefore, the hammer must always be lubricated after use. Tool marks can be rectified with a high-gloss polish.
Datasheets(X)
Face diameter (hammer) (Ø) | 12 mm |
Length of handle | 200 mm |
Last viewed
Countersunk head screw with hexagon socket ISO 10642, A2-070 stainless steel, plain
Hexagonal nut ISO 4032 steel, strength class 8, zinc-nickel-plated black (ZNBHL)
Rust stop primer
Medium-strength screw retainer
Screw with flattened half round head with collar and hexagon socket ISO 7380-2, steel, strength class 10.9, zinc-nickel-plated, black (ZNBHL)
Water pump pliers
Specially fused alumina sanding tip, pink
Metric double box-end wrench with POWERDRIV®
Half-round file DIN 7261, shape E
Finishing disc Useit® Superpad SG