PTFE thread-sealing tape
PTFE thread sealing tape
THRSEALTPE-PTFE-FRP-12MX12MMX0,1MM
Register now and access more than 125,000 products
Resistant to all aggressive media
Does not stick or swell
Therefore prevents seizing of the thread
Alignment of the thread connection, which includes limited turn-back, is permissible
Since the temperature and pressure are dependent on one another, it is not possible to allow both to be pushed to maximum levels simultaneously. In addition, the specifications depend on the respective medium. Therefore, these specifications can only serve as a guideline due to the variety of application options (see also DVGW approval).
Datasheets(X)
Material | Polytetrafluoroethylene |
Coating weight per m² | 60 g |
Thickness | 0.1 mm |
Width | 12 mm |
Length | 12 m |
Approval mark | DVGW |
Suitable for | Fine thread max. nominal diameter 10 |
Min./max. temperature resistance | -240 to 240 °C |
Max. pressure | 25 bar |
Silicone-free | Yes |
Free of lead (< 0.1 %) | Yes |
Free of tin (< 0.1 %) | Yes |
SVHC according to REACH < 0.1 % | Yes |
Free of chlorinated paraffins (< 0.1 %) | Yes |
Solvent free (< 1 %) | Yes |
Free of hydrocarbon plasticizers (< 0.1 %) | Yes |
Free of halogenated blowing agents (< 0.1 %) | Yes |
Free of hexabromocyclododecane (< 0.1 %) | Yes |
Free of scrap tyre granules | Yes |
Last viewed
Diesel injection cleaner
Hexagonal bolt with thread up to the head ISO 4017, A4-70 stainless steel, plain
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 8.8, plain
Ring ratchet wrench set 5 pieces
Heat-shrink crimp connector spade terminal
Microfibre towel
3/8" socket wrench insert Inch, hexagon, short
Metric double box-end wrench with POWERDRIV®
Lock washer DIN 127, steel, mechanically applied zinc coating, shape A
Auger drill bit plus plus