Open-end slugging wrench metric, straight
Open-end slugging wrench
OPNSLUGWRNCH-DIN133-WS60
Register now and access more than 125,000 products
- Standard: DIN 133
- Material: Special forged steel with high impact resistance
- Surface: Steel grey
- Geometry: Short, strong profile shaft and slugging end for the most demanding of tasks
- Head offset 15°
Datasheets(X)
Cargo, construction machinery, workshops, shipyards, heavy industry, mining and railways
 | |
Width across flats | 60 mm |
Length (L) | 320 mm |
Thickness of jaw (a) | 24.5 mm |
Width of jaws (outside) (b1) | 128 mm |
Last viewed
Cabin air filter QUICK FILTER PM 2.5
Pan Head screw with hexalobular head ISO 14583, A2-70 stainless steel, plain
Machine screw tap HSCo blue ring through hole DIN 371/376
Crepe masking tape
Specially fused alumina sanding tip, pink
Countersunk head screw with hexagon socket ISO 10642, A2-070 stainless steel, plain
Hexagon socket set screw with truncated cone ISO 4026 A2 stainless steel 21H, plain
Contact spray SW
3/8-inch socket wrench For TX screws, short
Hexagonal bolt with thread up to the head DIN 933, steel 8.8, zinc-plated, blue passivated (A2K)