Nylon anchor For light loads (secondary attachments)
Nylon anchor
DWL-PLA-5X25
Register now and access more than 125,000 products
- High-quality polyamide (nylon)
- Halogen and silicon free
- Temperature resistant from -40°C to +80°C
- The hammer-in stop prevents premature expansion during push-through installation
- The twist lock prevents turning in the drill hole
- Wall plug shaft with no expansion pressure prevents damage to plaster and tiles
- Push-through and cotter-pin installation
- For mounting, we recommend the ASSY-D plug screw
- Drill perforated brick using the rotary drill (without striking tool)
- The drill cuttings must be removed from the drill hole
- Screw length = attachment thickness (+plaster/insulation thickness) + anchor length + screw diameter
Datasheets(X)
- Plastic anchor for light loads (secondary attachments)
- Can be used in concrete, solid brick, solid sand-lime brick, hard natural stone
- Suitable for securing curtain rails, wall shelves, light wall cupboards, picture frames, cable ducts, cable clamps, electrical switches, towel rails, signs, motion detectors, hanging baskets etc.
- For attaching components in conjunction with a wood or chipboard screw (without drill tip, counter thread, ring thread) (e.g. ASSY-D)
- Can be used outdoors or in wet rooms in conjunction with a stainless steel screw
Anchor diameter | 5 mm |
Anchor length (l) | 25 mm |
Embedding depth (h nom) | 25 mm |
Nominal drill-bit diameter (d 0) | 5 mm |
Required wood screw diameter (d scr.wood) | 2.5 - 4 mm |
Required particle-board screw diameter (d scr.particle) | 4.5 mm |
Embedding depth (h s) | 25 mm |
Centre-to-centre distance (a) | 50 mm |
Edge clearance (a r) | 25 mm |
Drill hole depth (t) | 35 mm |
Max. attachment height (d a) - condition | Dependent on screw length |
Required screw length (l s) | Thickness of the add-on part (+ plaster/insulation thickness) + anchor length + screw diameter |
Last viewed
Ear defenders WNA 100 With good noise insulation properties and height-adjustable headband
Countersunk head screw with hexagon socket ISO 10642, A2-070 stainless steel, plain
Hexagonal bolt with thread up to the head ISO 4017, steel 10.9, zinc-plated, blue passivated (A2K)
Countersunk head screw with hexagon socket ISO 10642, A2-070 stainless steel, plain
Radiator exterior cleaner
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, A4-80 stainless steel, plain
Oil spray bottle plastic
Vehicle cable FLRY
Crimp cable lug, ring connector PVC-insulated
Twist drill bit HSS DIN 338 type RN 130°