Nail anchor W-ZND type FK

Name: Nail anchor W-ZND type FK
Brand: Würth
SKU: 090630540

Nail anchor, W-ZND flat head, type FK
DWL-FK-PLA-NL-Z2-(A1K)-15-5X40
ZEBRA

Art.-no. 090630540

EAN 4024835121286

All versions

Similar products

Prices for customers after login

Nail anchor W-ZND type FK

Art.-no. 090630540

Prices for customers after login

Quantity

x 200 pcs

Exclusively for trade customers

Login/Register
Call customer service:

For securing angle brackets, panels, metal sheets, cable ducts and any components for non-recessed installation. Wall plug body with flat head, nails zinc-plated steel

Quick, low-cost assembly

Can be removed again using drive in screw head

Pre-assembled with matching screw

Suitable for push-through installation

Clear integral hammer-in stop prevents premature expansion

For recessed or protruding installation

Resistant to UV rays

Rot resistant (plastic anchors made of high-quality polyamide)

Temperature resistant from -40°C to +150°C

Halogen-free

Drill hole

Clean the drill hole

Insert anchor through the component into the drilled hole

Knock in expansion nail until flush

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

Application area

Can be used in concrete, solid brick, sand-lime brick, aerated concrete, vertically perforated brick, lightweight concrete, hollow sand-lime brick, screed, gypsum panels

Any attachments for light and medium loads in woodworking, metalworking, plumbing and electrical applications

Securing angle brackets, panels, metal sheets, cable ducts, battens etc.

Anchor diameter	5 mm
Anchor length (l)	40 mm
Max. attachment height (t fix)	15 mm
Embedding depth (h nom)	25 mm
Nominal drill-bit diameter (d 0)	5 mm
Drill hole depth (h 1)	30 mm
Hole diameter in component (d f)	5 mm
Material of nail	Steel
Surface	Zinc plated
Internal drive	Z2

Performance data
Anchor diameter [mm]			5	6	8	10
Recommended tensile load	Concrete ≥ B25 or C20/25	F_rec [kN]	0,17	0,26	0,40	0,55
	Solid brick Mz 12		0,21	0,30	0,35	0,40
	Calcium silicate block KS 12		0,20	0,30	0,35	0,40
	Autoclaved aerated concrete PP2		0,04	0,05	0,08	0,08
	Autoclaved aerated concrete PP4		0,08	0,10	0,12	0,12
	Vertically perforated brick Hlz 12		0,13	0,15	0,20	-
	Lightweight solid concrete block pumice stone V2		0,15	0,16	0,18	-
	Hollow calcium silicate block KSL 12		0,10	0,12	0,13	-

Characteristic values
Tightening torque (GEW type only)	T_inst [Nm]	-	6	6	-
Drill hole depth	h1 ≥ [mm]	30	35	45	55
Embedment depth	h_nom ≥ [mm]	25	30	40	50
Thread diameter (GEW type only)	d_thr [mm]	-	6	8	-
Thread length (GEW type only)	I_thr [mm]	-	6	9	-
Nominal drill diameter	d₀ [mm]	5	6	8	10
Hole diameter in member	d_f [mm]	5	6	8	10