Metric double-end flare-nut wrench Bi-hex with POWERDRIV®
Open double-end flare-nut wrench bi-hexagon
DBENDFLARNUTWRNCH-OPN-METR-12PT-WS30X32
Register now and access more than 125,000 products
Ergonomic double-end flare-nut wrench for demanding work
- The union nut wrench has a deep, 15° offset and an arc swing of 5° on the box end for efficient power transmission even in hard-to-reach places
- The design saves time and effort
Standard compliant and particularly high quality
- The double-end flare-nut wrench complies with DIN 3118
- With proven chromium-vanadium steel
- The surfaces have a matt chrome plated finish for a firm grip even with oily hands
- The box ends are also polished
- The surface is permanently resistant to rust and ensures a far longer than average service life
- The long-term usability of the double-end flare-nut wrench reduces costs of replacement and storage
Datasheets(X)
Tightening and loosening union nuts and pipe screw joints
 | |
Width across flats (SW) | 30 x 32 mm |
Length (L) | 297 mm |
Ring thickness (a1) | 19 mm |
Ring thickness 2 (a2) | 20.5 mm |
External diameter of ring (b1) | 50.6 mm |
External diameter of ring 2 (b2) | 52.6 mm |
Min. ring opening (B1 min) | 22 mm |
Min. ring opening 2 (B2 min) | 24 mm |
Material | Chrome-vanadium steel |
Surface | Chrome plated |
Last viewed
Hexagon bolt with thread up to the head DIN 558, steel 4.6, zinc-plated, blue passivated (A2K).
VDE 3/8 inch ratchet
HSCo Multi Longlife machine tap for blind holes DIN 371/376
Hand tap, taper tap HSS DIN 352
Twist drill bit HSCo DIN 338 Type RN MFD VARIO
3/8-inch socket wrench insert, metric long
Body Sealing Plugs
Single wire seal (SEAL) For uninsulated cable connector
Pneumatic jigsaw DST mini
Multi-Tester Pro II LCD two-pin voltage tester