Metric double box-end wrench with POWERDRIV®
Half moon-shaped box-end wrench
DBBOXENDWRNCH-METR-STARTER-BLOCK-WS19X22
Register now and access more than 125,000 products
Ergonomic double box-end wrench for hard-to-reach places
- The obstruction wrench ensures efficient power transmission thanks to its half-moon shape.
- The design saves time and effort
- The heads are thin-walled and countersunk on both sides, and the arc swing is 30°
Standard compliant and very high quality
- The double box-end wrench complies with ISO 3318
- With proven chromium-vanadium steel
- The surfaces have a matt chrome-plated finish for a secure grip even with oily hands
- The box ends are also polished
- The surface provides lasting resistance against rust and ensures a far longer than average service life
- The long-term usability of the double box-end wrench reduces costs of replacement and storage
Datasheets(X)
Applications with engine blocks, starters and intake and exhaust manifolds
 | |
Width across flats | 19 x 22 mm |
Length (L) | 235 mm |
Ring thickness (a1) | 11.5 mm |
Ring thickness 2 (a2) | 12 mm |
External diameter of ring (d1) | 28.5 mm |
External diameter of ring 2 (d2) | 32 mm |
Material | Chrome-vanadium steel |
Surface | Chrome plated |
Tip type | Twelve-sided head |
Last viewed
Synthetic corundum flap wheels
Hexagon nut, low profile DIN 985, steel I6I/I8I, zinc-plated, blue passivated (A2K)
Twist drill bit HSCo DIN 338 type RN oxide
Tungsten carbide bur with aluminium teeth
O-ring, metric
Hexagonal bolt with thread up to the head DIN 558, steel 4.6, zinc-plated, blue passivated (A2K).
Hand tap, taper tap HSS DIN 352
Body Sealing Plugs
Thin-walled heat-shrink hose Shrink rate 2:1 without internal adhesive
Circlip for bore hole, standard version, shape J DIN 472 for bore holes, spring steel, phosphated and oiled